p2s
| Item | Specification | |
| Printing Technology | Fused Deposition Modeling | |
| Body | Build Volume (W*D*H) |
256*256*256 mm³
|
| Chassis |
Plastic and Steel
|
|
|
Outer Frame
|
Plastic and Glass
|
|
| Physical Dimensions | Physical Dimensions |
392*406*478 mm³
Package Size: 490*490*560 mm³
|
| Weight |
P2S
Net Weight: 15.0kg
Gross weight: 18.58kg
P2S Combo (AMS 2 Pro included)
Net Weight: 16.4kg
Gross weight: 21.33kg
|
|
| Toolhead | Extruder Gear | Hardened Steel |
| Nozzle | Hardened Steel | |
| Max Nozzle Temperature | 300 °C | |
| Included Nozzle Diameter | 0.4 mm | |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm | |
|
Filament Cutter
|
Built-in
|
|
| Filament Diameter | 1.75 mm | |
| Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor | |
| Heatbed |
Build Plate Material
|
Flexible Steel Plate
|
|
Included Build Plate Type
|
Textured PEI Plate
|
|
| Supported Build Plate Type |
Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
|
|
| Max Heatbed Temperature | 110 ℃ | |
| Speed | Max Speed of Toolhead | 600 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² | |
|
Max Flow for Hotend
|
40 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
|
|
|
Filtration
|
Activated Carbon Filter Type
|
Granulated Coconut Shell
|
|
VOC Filtration
|
Supported
|
|
|
Particulate Matter Filtration
|
Supported
|
|
| Cooling | Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control | |
|
Auxiliary Part Cooling Fan
|
Closed Loop Control | |
|
Filament Supported
|
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
|
|
| Sensor | Camera |
Built-in; 1920*1080; 30 fps HD
|
| Door Sensor | Supported | |
| Filament Run Out Sensor | Supported | |
| Filament Tangle Sensor | Supported | |
| Filament Odometry | Supported with AMS | |
| Power Loss Recovery | Supported | |
| Electrical Requirements | Voltage | 100-120 VAC / 200-240 VAC, 50/60 Hz |
| Max Power* |
1200 W@220 V / 1000 W@110 V
|
|
|
PLA Steady-State Power
|
200 W@220 V / 200 W@110 V（PLA printing）
|
|
|
Working Temperature
|
|
10 °C–30 °C
|
| Electronics | Touchscreen |
5-inch 854*480 Touchscreen
|
| Storage | Built-in 8 GB EMMC and USB Port | |
| Control Interface | Touchscreen, mobile App, PC App | |
|
Motion Controller
|
Dual-core Cortex-M4 and Single-core Cortex-M7
|
|
|
Application Processor
|
Quad-core 1.5 GHz ARM A7
|
|
| Neural Processing Unit | 2 TOPS | |
| Software | Slicer |
Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
|
| Supported Operating System |
MacOS, Windows, Linux
|
|
|
Network Control
|
Ethernet
|
Not Available
|
|
Wireless Network
|
Dual-Band Wi-Fi
|
|
|
Network Kill Switch
|
Not Available
|
|
|
Removable Network Module
|
Not Available
|
|
|
802.1X Network Access Control
|
Not Available
|
|
| Wi-Fi | Operating Frequency |
2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
|
| Wi-Fi Transmitter Power (EIRP) |
2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
|
|
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n | |